RU

/

EN
burger-menu

Поиск по сайту:

airplane photo

Страна : Канада

Год : 1942

(проект)

  • Aeroplane Monthly 1980-10 / H.Levy - Burnelli Lifting Fuselage Projects

    The Canadian Car & Foundry B-2000B Super Bomber. This 222ft span aircraft was CCF’s proposal in the B-36 competition in 1942. It was to have been powered by eight Allison 3420s coupled in fours so that each pair provided 5,000 h.p., totalling 20,000 h.p. Armament called for a total of 14 20mm cannon in movable turrets located in the nose, at each end of the tail booms and in the upper and lower surfaces of the booms. With a normal bomb load of 40,000lb the B-2000B’s all up weight would have been 220,000lb and the range 4,000 miles. The designed top speed was 300 m.p.h.

  • Aeroplane Monthly 1980-10 / H.Levy - Burnelli Lifting Fuselage Projects

    The Canadian Car & Foundry V-1000 project, designed by Charles Villiers. This transport aircraft would have utilised the lifting fuselage in its most advanced form. Note the absence of tail booms. Most of the disposable load was located spanwise in the body, thereby allowing a very low structure weight with increased cabin volume. Designed to carry 135 passengers with baggage 4,500 miles non-stop at 220 m.p.h., the V-1000 had a 220ft wing span and a wing area of 4,499sq ft.
       The V-1000’s empty weight was 120,000lb and it grossed at 220,000lb. Because of the efficiency of the lifting fuselage principle the V-1000 could maintain its 220 m.p.h. cruising speed on only 45 per cent power. Maximum endurance would have been 21hr.
       Although the National Research Council of Canada tested a wind tunnel model of the V-1000, no prototype was built.